cambium gigabit ethernet surge suppressor from last mile gear.

Cambium Gigabit Ethernet Surge Suppressor

 Login for Pricing

Product Description

Cambium Gigabit Ethernet Surge Suppressor (56V)

The Cambium gigabit Ethernet surge suppressor is critical for lightning protection to minimize the potential for damage.

The Cambium Gigabit Ethernet Surge Suppressor is compatible with the PMP 450i (Access Point and Subscriber Module), PTP 450i and PTP 820S. The unit ships suitable for mounting to a wall or pole. Cambium Networks has created this excellent surge suppressor to work perfectly with their pmp 450i, ptp 450i, and ptp 820S series of radios.

General Product Overview
• Environmental: IP55
• Connectors: 2 x RJ-45 1000BaseT
• Power: 56V DC nominal
• Protection Mode: Line to Line and Line to Ground
• Operating Temperature: -40 to 140deg F (-40 to 60deg C)
• Mounting: Pole or wall-mount

cambium ptp 450 900 mhz units from last mile gear.
Cambium PTP 450 900 MHz We are excited, here at Last Mile Gear, to discuss the newest Cambium PTP 450 900 MHz back haul radio. At this stage it is in pre-launch stages but we are excited about it for 2016. This unit provides excellent close in and non line…
Cambium PTP 820S
Cambium PTP 820S The Cambium PTP 820S represents a new generation of radio technology, capable of high bit rates and longer reach, and suitable for diverse deployment scenarios. The PTP 820S backhaul supports cutting edge capacity-boosting techniques, such as QPSK to 2048 QAM and Header De-Duplication, to offer a high capacity…
Weight 1 lbs
Dimensions 5 x 4 x 2 in
Cambium Gigabit Ethernet Surge Suppressor PDF Spec sheet

Cambium Gigabit Ethernet Surge Suppressor
Cambium Networks designs outdoor wireless broadband solutions to operate in the toughest of
environments. Lightning strikes are the most typical cause of system outages or failures of
mast-mounted equipment especially when mounted as high as 300m. The Gigabit Ethernet Surge
Suppressor is critical for lightning protection to minimize the potential for damage.

Network operators should always follow best-practices for grounding and lightning protection. Doing
so will minimize network outages and reduce the associated costs of tower climbs and equipment
repair/replacement.

The Gigabit Ethernet Surge Suppressor is compatible with the PMP 450i (Access Point and Subscriber
Module), PTP 450i and PTP 820S. The unit ships suitable for mounting to a wall or pole.
Specifications
Features

MODEL NUMBER C000000L033A

TRANSFER RATE 1000 Base T

CONNECTORS Two x RJ-45

NOMINAL VOLTAGE 56V

PROTECTION MODE Line-to-line and line-to-ground

SURGE ARRESTOR TVS Diodes (Transient Voltage Suppression for longer operational life) SURGE
CURRENT RATING, L-G, total 172A, 10/1000us
RESPONSE TIME 5 nanoseconds typical

MOUNTING Pole mount or wall mount

DIMENSIONS 4.6 in. x 3.4 in. x 1.8 in.(118mm x 87.5mm x 46.5mm)

WEIGHT 0.34 lbs (156 gm)

WIND SURVIVAL 200 mph (321 km/hour)

OPERATING TEMPERATURE -40° F (-40° C) to +140° F (+60° C)

HUMIDITY 100% condensing

ENVIRONMENTAL PROTECTION IP54 (Dust and Water Intrusion Protection)