]
Industrial wall mounted managed gigabit ethernet switch by Planet Technologies and last mile gear

Industrial wall mounted managed gigabit ethernet switch by Planet Technologies – WGS-4215-8P2S

 Login for Pricing

Product Description

Industrial wall mounted managed gigabit ethernet switch

“Industrial wall mounted managed gigabit Ethernet switch” is more than just a technical statement.

If you’re a home or commercial building automation service company, then this product can mean the difference between a satisfied customer or bad word of mouth publicity. It could make the difference between someone being alive and someone being dead. As most IP surveillance engineers are aware, the world of commercial and home based surveillance is operated via wireless LAN systems today and need the best in reliable power and management.

Designed to be installed in a wall enclosure or simply mounted on a wall at any convenient location, Planet WGS-4215-8P2s , an innovative, Industrial 8-port 10/100/1000T Wall-mounted Managed Switch with 4-Port PoE+, offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and user-friendly interface. The WGS-4215-8P2S can operate reliably, stably and quietly in any environment without affecting its performance. With a total power budget of up to 144 watts for different kinds of PoE applications and featuring ultra-networking speed and operating temperature ranging from -40 to 75 degrees C in a compact but rugged IP30 metal housing, the WGS-4215-8P2S is an ideal solution to meeting the demand

As it is the managed PoE switch for surveillance, wireless and VoIP networks, the WGS-4215 features the following special PoE management functions:

  • PD alive check
  • Scheduled power recycling
  • PoE schedule
  • PoE usage monitoring

 

With a wide array of additional features that makes the Planet technologies WGS-4215-8P2S so impressive.

“Intelligent Powered Device Alive Check” – Plant Technologies WGS-4215-8P2S

“Scheduled Power Recycling” – Plant Technologies WGS-4215-8P2S

“PoE Schedule for Energy Saving” – Plant Technologies WGS-4215-8P2S

“PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage” – Plant Technologies WGS-4215-8P2S

“Innovative Wall-mount Installation” – Plant Technologies WGS-4215-8P2S

“Environmentally Hardened Design” – Plant Technologies WGS-4215-8P2S

“IPv6/IPv4 Dual Stack Management” – Plant Technologies WGS-4215-8P2S

“Robust Layer 2 Features” – Plant Technologies WGS-4215-8P2S

“Efficient Traffic Control” – Plant Technologies WGS-4215-8P2S

“Friendly and Secure Management” – Plant Technologies WGS-4215-8P2S

“Advanced Network Security” – Plant Technologies WGS-4215-8P2S

 

Baicells Atom R9 Indoor 2.5GHz 5dBi Indoor CPE Baicells Atom R9 Indoor 2.5GHz 5dBi  model indoor CPE is intended for unique applications, such as MDUs, MTUs, campus environments, kiosk Applications, or temporary events. Use this CPE anywhere the short range microcell model is needed. Feature-Rich Integration The Atom 5dBi CPE…
Cambium Networks ePMP Elevate ePMP Elevate is a software solution allowing fixed wireless broadband networks to gain the powerful signature capabilities of Cambium Networks’ ePMP platform, including frequency reuse enabled by GPS Synchronization and Smart Beamforming, even on non-Cambium 802.11n-based hardware. Network migration is taken to the next level, solving…
Key Features

Physical Port
8-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function
2 100/1000BASE-X mini-GBIC/SFP slots

Power over Ethernet
Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
Backward compatible with IEEE 802.3af Power over Ethernet
Up to 8 ports of IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE port
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100 meters
PoE management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limitation
– PD classification detection
– PD alive check
– PoE schedule

Industrial Case and Installation
Compact size with fixed wall-mounted, magnetic wall-mounted or DIN-rail design
IP30 metal case protection
Supports -40 to 75 degrees C operating temperature
Supports ESD 8KV DC Ethernet protection
Dual power input design
– 48V~56V DC wide power input with polarity reverse protect function
– 3-pin terminal block or DC jack connector

Switching
Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
8K MAC address table size
10K jumbo frame
Automatic address learning and address aging
Supports CSMA/CD protocol

Layer 2 Features
Supports VLAN
– IEEE 802.1Q tagged VLAN
– Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
– Protocol VLAN
– Voice VLAN
– Private VLAN (Protected port)
– Management VLAN
– GVRP
Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STP BPDU Guard, BPDU Filtering and BPDU Forwarding
Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
Provides port mirror (many-to-1)
Loop protection to avoid broadcast loops

Quality of Service
Ingress/Egress Rate Limit per port bandwidth control
Traffic classification
– IEEE 802.1p CoS
– TOS/DSCP/IP precedence of IPv4/IPv6 packets
Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast
Supports IPv4 IGMP snooping v2, v3
Supports IPv6 MLD snooping v1, v2
IGMP querier mode support
IGMP snooping port filtering
MLD snooping port filtering

Security
Storm Control support
– Broadcast/Unknown unicast/Unknown multicast
Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS servers
– DHCP Option 82
– RADIUS/TACACS+ authentication
Access Control List
– IPv4/IPv6 IP-based ACL
– IPv4/IPv6 IP-based ACE
– MAC-based ACL
– MAC-based ACE
MAC Security
– Static MAC
– MAC filtering
Port security for source MAC address entries filtering
DHCP snooping to filter distrusted DHCP messages
Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
IP source guard prevents IP spoofing attacks
DoS attack prevention
SSH/SSL

Management
IPv4 and IPv6 dual stack management
Switch Management Interface
– IPv4/IPv6 Web switch management
– Telnet Command Line Interface
– SNMP v1, v2c, v3
– SSH and SSL secure access
User privilege levels control
Built-in Trivial File Transfer Protocol (TFTP) client
Static and DHCP for IP address assignment
System Maintenance
– Firmware upload/download via HTTP/TFTP
– Configuration upload/download through HTTP/TFTP
– Hardware reset button for system reboot or reset to factory default
SNTP Network Time Protocol
Cable diagnostics
Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
SNMP trap for interface Link-up and Link-down notification
Event message logging to remote Syslog server
Four RMON groups (history, statistics, alarms and events)
PLANET Smart Discovery Utility